The Modular Freezer Rack provides a flexible and low cost solution for organising sample storage in a chest freezer. Simply click the individual rack holders together to a tower of up to 15 holders. This way your valuable samples can be stored in an organized manner. One rack holder has a capacity of a single Roborack-96, Comorack-96 or any of the ULT Racks. When using the Loborack-96 with a low cover / Micronic 96-1 Rack, one rack holder fits two Loboracks, providing a space saving storage solution.
Micronic operates corporate integrated Quality Management System (QMS) that is certified to ISO 9001:2015.
Reducing our impact on the environment is an integral part of our continuous improvement efforts. The environmental policy of Micronic is determined by our headquarters in the Netherlands, which is certified to ISO 14001:2015.
Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment (which is comparable to the US Federal Standard 209E Class 10,000).
For the manufacturing of its long term sample storage labware products Micronic uses solely virgin plastic raw material. The raw materials and auxiliary agents are selected based on the specifications that satisfy the high quality requirements of our products. The materials are FDA approved and comply with the (USA) USP XXII tests, including class VI (Medical approved), and the European Pharmacopoeia-monograph 3.2.2 unless communicated otherwise. Material components used to produce Micronic labware can be traced via the lot number indicated on the packaging.
The materials used for Micronic tubes are the result of extensive research. One selection criteria is that no measurable amount of extractables should leach into samples.
By maintaining the highest possible hygiene level during our production processes, Micronic manufactured labware is free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml). Our products are periodically tested on RNase, DNase and their endotoxin levels by independent expert organizations.
The Micronic 2D Data-Matrix codes and 1D barcodes are produced conform industry standards. The 2D Data-Matrix code (which adheres to the ECC200 standard) and 1D barcode (type 128B) are laser-etched into the code area and are guaranteed unique.
Products produced by Micronic are tested according to AQL inspection level G2 and AQL value 0.4.
Micronic Sample Storage tubes are classified as general laboratory products according to leading European Life Science Organizations (GAMBICA, FHI, LABMAS, Laborama, SPECTARIS). More information can be found here.
Upon request, Micronic products can be supplied gamma irradiated or ethylene oxide treated.
Our products comply with the IATA requirements for the transport of diagnostic specimens (UN packing instruction 602 and 650), assuming that our products are properly used (closed).
If you have any additional questions on the quality and safety of our products, please feel free to contact Micronic at sales@micronic.com.
| Parameter | Modular Vertical Freezer Rack |
|---|---|
| Freezer rack height | 68.0mm |
| Material | ABS-PC |
| Rack length | 144mm |
| Rack width | 68mm |
| Chemical resistance | + |
| Temperature range | -80°C to +80°C |
| Article Number | Description | Unit Size | Case Size |
|---|---|---|---|
| MP34000 | Modular Vertical Freezer Rack | 15 holders | 1 |
The Comorack-96 can hold 96 (8x12) individual 1.40ml round bottom tubes. The rack is made from Polycarbonate and manufactured to the industry leading strict tolerances.
The Micronic 96-1 Rack can hold 96 individual 0.50ml Tubes with Internal Thread, 0.30ml Tubes with External Thread or 0.40ml Tubes with External Thread.
The Micronic 96-4 Rack can hold 1.40ml internally threaded tubes with TPE Push Caps and Screw Caps or 1.40ml externally threaded tubes with Screw Caps.
The Micronic 96-2 Rack is developed to hold 96 individual 0.75ml internally threaded or externally thread sample storage tubes.