Micronic Screw Cap Recapper CS100
The Micronic Screw Cap Recapper CS100 line is developed to improve the manual (de)capping of tubes because they are set to a precise torque value.
Find your ideal sample storage tube: Tube Wizard
Cappers & Decappers
Micronic Screw Cap Recapper CS500
The Micronic Screw Cap Recapper CS500 line was developed in collaboration with several leading laboratories to increase efficiency and consistency in sample handling. This ergonomic handheld device is available in three models, each designed for a specific tube format:
- CS500: Recaps a row of 8 tubes
- CS510: Recaps a row of 6 tubes
- CS520: Recaps a row of 4 tubes
All models allow users to cap, decap, or recap a row of tubes in less than 5 seconds – up to 10 times faster than manual processing. This minimizes sample evaporation and boosts productivity significantly.
The CS500 line ensures that screw caps are tightened securely and uniformly, improving the reliability of sample storage. The device requires no battery charging, meaning it’s always ready for use.
Built for durability, the Micronic Screw Cap Recapper CS500 line comes with a 1-year warranty.
Our Standards
Product Quality Information
Certified Class 7 clean room
Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment (which is comparable to the US Federal Standard 209E Class 10,000).
Virgin material and approvals
For the manufacturing of its long term sample storage labware products Micronic uses solely virgin plastic raw material. The raw materials and auxiliary agents are selected based on the specifications that satisfy the high quality requirements of our products. The materials are FDA approved and comply with the (USA) USP XXII tests, including class VI (Medical approved), and the European Pharmacopoeia-monograph 3.2.2 unless communicated otherwise. Material components used to produce Micronic labware can be traced via the lot number indicated on the packaging.
Extractables
The materials used for Micronic tubes are the result of extensive research. One selection criterion is that the amount of measurable extractables leaching into samples is minimized.
RNase, DNase and endotoxin (pyrogen)
By maintaining the highest possible hygiene level during our production processes, Micronic manufactured labware is free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml). Our products are periodically tested on RNase, DNase and their endotoxin levels by independent expert organizations.
Laser-etched codes
The Micronic 2D Data-Matrix codes and 1D barcodes are produced conform industry standards. The 2D Data-Matrix code (which adheres to the ECC200 standard) and 1D barcode (type 128B) are laser-etched into the code area and are guaranteed unique.
Product quality control
Products produced by Micronic are tested according to AQL inspection level G2 and AQL value 0.4.
CE marking
Micronic Sample Storage tubes are classified as general laboratory products according to leading European Life Science Organizations (GAMBICA, FHI, LABMAS, Laborama, SPECTARIS). More information can be found here.
Decontamination
Upon request, Micronic products can be supplied gamma irradiated or ethylene oxide treated.
IATA
Our products comply with the IATA requirements for the transport of diagnostic specimens (UN packing instruction 602 and 650), assuming that our products are properly used (closed).
If you have any additional questions on the quality and safety of our products, please feel free to contact Micronic at sales@micronic.com.
Our solutions
CAPPING & DECAPPING SYSTEMS
To enhance and accelerate the capping and decapping process, the Micronic (De)Capping line provides you with several options. The Screw Cap Recapper CS100 is developed to improve the manual (de)capping of tubes. The cost-effective tools are set to a precise torque value and stop turning when a perfect seal is established, ensuring an optimal sealing performance. Developed in conjunction with several leading laboratories, the Screw Cap Recapper CS500 offers the ability to cap, decap or recap a row of tubes in less than 5 seconds and a whole rack in only 1 minute. This is 10 times faster than by hand and improves productivity. The automated Screw Cap Recapper CS700 is “must-have” equipment for higher throughput users. The devices are user-friendly and extremely durable and reliable and cap entire racks in 30 seconds.
Micronic received a Good Industrial Design Award (GIO award) for the innovative design of the recapper. The award indicates that the recapper is original, functional, ergonomic, designed with respect for the environment and adds value to end-users.
FEATURES & BENEFITS
Screw Cap Recapper CS500
10 times faster than by hand!
Caps a row of 8, 6 or 4 tubes in 5 seconds and a whole rack of 96 tubes in only 1 minute
Small footprint
Very small footprint for bench top use
Safe
Minimizes cross-contamination
Compatibility
Compatible with Micronic Screw Caps and tubes, and products from other brands
Reproducibility
Each screw cap is reproducibly tightened securely and uniformly
Cost-effective
Cost-effective solution to cap, decap or recap a row of 8 tubes at once
Specifications
product information
| Parameter | Screw Cap Recapper CS500 |
|---|---|
| Compatibility | ANSI/SLAS standard 96-format racks |
| Cycle time | Less than 5 seconds per row |
| Dimensions | 17.8 x 16.1 x 71.0 cm / 7.01 x 6.34 x 27.95 in |
| Voltage | 115 - 230V |
Testimonials
What our customers say
ARTICLE NUMBERS
ORDERING INFORMATION
| Article Number | Description | Unit Size |
|---|---|---|
| MP35420 | Micronic Screw Cap Recapper CS500 for Micronic Screw Caps (TRE) | 1 unit |
| MP35421 | Micronic Screw Cap Recapper CS500 for Micronic Screw Caps (TRI) | 1 unit |
| MP35422 | Micronic Screw Cap Recapper CS500 for Micronic Low Profile Screw Caps (TRI) | 1 unit |
| MP35423 | Micronic Screw Cap Recapper CS500 for Matrix Screw Caps (TRI) | 1 unit |
| MP35424 | Micronic Screw Cap Recapper CS500 for Azenta Screw Caps (TRE) | 1 unit |
| MP35425 | Micronic Screw Cap Recapper CS500 for Azenta Screw Caps (TRI) | 1 unit |
| MP35426 | Micronic Screw Cap Recapper CS500 for Azenta 2K Screw Caps (TRI) | 1 unit |
| MP35427 | Micronic Screw Cap Recapper CS500 for LVL Screw Caps (TRE) | 1 unit |
| MP35428 | Micronic Screw Cap Recapper CS500 for LVL Screw Caps (TRI) | 1 unit |
| MP35429 | Micronic Screw Cap Recapper CS500 for Nunc Screw Caps (TRI) | 1 unit |
| MP35430 | Micronic Screw Cap Recapper CS500 for Eppendorf Screw Caps (TRE) | 1 unit |
| Article Number | Description | Unit Size |
|---|---|---|
| MP35440 | Micronic Screw Cap Recapper CS510 for Micronic Screw Caps (TRE) | 1 unit |
| MP35441 | Micronic Screw Cap Recapper CS510 for Micronic Screw Caps (TRI) | 1 unit |
| MP35442 | Micronic Screw Cap Recapper CS510 for LVL Screw Caps (TRE) | 1 unit |
| Article Number | Description | Unit Size |
|---|---|---|
| MP35445 | Micronic Screw Cap Recapper CS520 for Micronic Screw Caps (TRE) | 1 unit |
| MP35446 | Micronic Screw Cap Recapper CS520 for Micronic Screw Caps (TRI) | 1 unit |
Contact
Interested in this product?
We're here to help you with any questions you might have
Bas van Keulen
fill out the form below
Related products
More interesting products
Micronic Screw Cap Recapper CS700
The award winning Micronic Screw Cap Recapper CS700 offers users the ability to cap, decap or recap 96, 48 or 24 tubes with Screw Caps in a single action.
Product deal!
Screw Caps with External Thread
The Micronic Screw Caps for tubes with external thread have a triple start thread for the most optimal sealing quality, ensuring long-term sample preservation and storage at ultra-low temperatures.
Including 1D and 2D code
0.75ml Tubes External Thread Hybrid
The hybrid tube combines automated and visual sample identification and guarantees the complete traceability of samples. Working volume (+21°C): 0.62ml with Screw Cap.